ALPHA CARBON™ VOLUME CONTROL - 3 YEARS IN THE MAKING!!
The most innovative product for Pachinko and Slot machines since the creation of the Pachinko Ball and Slot Token.
We have spent more than 3 years and $1,000.00's of dollars to find the final solution to the volume problems
associated with the excessive noise level these machines produce.
If the words Potentiometer, Cermet Trimmers, Pots or
Attenuator are mentioned our Technical staff run and hide. It
has been the most difficult of problems to solve. We assembled 100's of different combinations and the problem remained.
We purchased virtually every "volume control" we could find through Google and eBay. Every one we tested had the
identical problem. The problem was the volume controls would only vary the volume 2% to 5%. Some "volume controls" were
less than 2%.
We have thought for years that the problem is changing a 24V Pachinko/Slot system so that it will operate with 110V US
current. Volume control systems work on 12V car stereos, 110V stereo systems, 110V musical instruments. Why wouldn't they
work with Pachinko or Slot machines? None of the above varies the current from 110V to 24V. Our final conclusion was
to find a company in Japan or Taiwan that were experts in 24V technology. We found an Audio engineering firm in Taiwan
that solved the problem! When the test model arrived we were very
apprehensive and gave it little chance of working.
It took a total of 12 minutes to install the 3 volume controls on a Captain Roberts Pachinko machine and turned it on.
We started with the Alpha Carbon™ volume control in the off position. Then we increased the volume to 10%, Perfect!
We then tried 20%, 30%, 50% 75%, and 100% -- ALL PERFECT! IT WORKS!!
|
THE BEGINNING
Below is a picture of just a few components that we used in the
development of a volume control for Pachinko and Slot machines.
If you check the Internet and eBay you will see many of these
parts. We can tell you that 100% of these did not work. We are
not saying that there aren't controls out there that would work.
What we are saying is that we spent 3 years finding a component that will vary the sound level from 0 to 100%.
Below is a picture of a volume control with instructions that were cut out of an 8 x 10 sheet of paper. We found this
jewel on eBay and it cost us more than $20.00 and we didn't even get a full sheet of paper. We installed this thing
and used an audio meter. The variation in sound level was exactly 1.2%. Just like our background music from Forrest Gump --
Life is like a box of chocolates, you don't know what you will get!!
This is just one example of what we found on the Internet. All kinds and all prices from $8.00 to more than $20.00.
Regardless of
the price they all had one thing in common. They wouldn't vary the sound more than 6%. Get a hearing aid or earplugs. That makes
the others work better.
THE SOLUTION
The parameters we defined as absolutely necessary for a volume control to work perfectly and fit into a small place where speakers
normally hide yet large enough to be functional. Potentiometers and
cermet trimmers require a jewelers screwdriver to adjust. We
did not feel that would be very functional. After buying premade and trying to make our own devices with these types of components it
became very clear they don't work properly and are a pain to try to adjust. We found the optimum size of a volume control would be
5/8" X 7/8" and not more than 3/4" in height. This size will mount close to the speaker and yet allow doors and covers to close
properly.
The next parameter is making the installation simple and with a minimum of parts and tools. All that is required is the
Alpha Carbon™ Volume Control, the 2 supplied 3M Scotchlok™ wire connectors, a pair of scissors, a small pair
of pliers, Super Glue Gel™, a 1/2" piece of double sided tape, and possibly a Phillips screwdriver. Here is a picture from our Installation
Guide showing the parts and tools required to install 3 Alpha
Carbon™ Volume Controls.
THE INSTRUCTION CD
Consider the instruction guide from the $20.00 control in THE BEGINNING section above. What we provide is a 16 page step-by-step
installation guide with 20 color photos. We have tested the accuracy of the Alpha Carbon™ Installation guide and find it to be 100%
accurate. You will be able to install a volume control on any Pachinko or Slot machine, in minutes, if you will take the time to read and
understand our easy to read guide. Technical assistance is just a call away if you encounter a problem above your ability to resolve.
DETERMINE THE CONTROLS REQUIRED
As illustrated above we need 3 Alpha Carbon™ Volume Controls for the Captain Roberts Pachinko pinball machine. Pachinko and
Slot machines will require a volume control for each speaker. Your machine may have 1, 2, 3, or 4 speakers depending on the make
and model. The illustrated picture above is just 1 of 20 detailed pictures to assist you in the installation process.
WHAT IS INCLUDED
Alpha Carbon Volume Control
Installed Lead Wires
2 Scotchlok Wire Connectors
16 Page Color Illustrated Installation Guide CD
|
|
SHIPPING
INFORMATION
Shipping will be $2.00 via US Postal Service with
Shipping notification provided. We ship only to the 50 United States.
|
|
We can make your game room look
just like a casino! IGT, Olympia, Nishijin, NET, FUJI
and Sankyo are just a few of the Slots and Pachinkos
with Video slots we sell and service. We now carry Touch
Screen slots! Touch Screen slot machines are taking the
country by storm. We maintain an extensive inventory of
Las Vegas Slot machines, Pachislo slot machines,
pachinko pinball machines, authentic engraved pachinko
balls, slot machine tokens, slot machine or pachinko
machine bulbs, 100's of slot machine parts (new and
used) and pachinko machine parts. If you currently have
a Video poker, Blackjack table, Roulette wheel or Poker
table, our gaming machines will add that special touch
to make your rec room perfect!
|
Click Here To Return To
Pachinko Page
|
|
|
©Copyright 2008 -
Graphique Media, Inc. All Rights Reserved. |
 |
 |
|